Maintenance & hydraulic tools for bearings and transmission parts


¡Nuestra oficina está abierta al público! 

We are open from Monday to Friday, 8.30 am - 5.00 pm.

You can always reach us by phone or email: Contact

We are closed on public holidays:

New Year's Day                Wed, 1 Jan 2020

Good Friday                Fri, 10 Apr 2020

Easter Sunday                Sun, 12 Apr 2020

Easter Monday                Mon, 13 Apr 2020

Liberation Day                Tue, 5 May 2020

Ascension Day                Thu, 21 May 2020

Whitsun                        Sun, 31 May 2020

Whit Monday                Mon, 1 Jun 2020

Christmas Day                Fri, 25 Dec 2020

2nd Day of Christmas        Sat, 26 Dec 2020

In principle, we deliver from stock. Unless it concerns a custom product or non-standard products.

Standard and custom-made products>>

Tell us where you are and we will inform you if there is a local distributor present. 

Contact us>>

We ship to all countries in the world, except those countries that are subject to a trade embargo.


The login is only available to our official distributors.

Become a distributor>>

For exceptions we can create a special login with which you can order online. Ask about the possibilities and call or email our Sales dept.: Contact

Why yes! We have our own YouTube channel with a collection of video's which we regularly update. Take a look : YouTube

Yes! Betex Hydrauliek® is interchangeable with all common brands.

About BETEX® Hydraulic Power!>>

Our manuals can be found here in Downloads If you cannot find a manual call or email us: Contact

Where can I find the return form?  ->> return form

The induction heater works in the same way as a transformer. The primary coil is the heater and the secondary coil is the workpiece. When the heater is switched on, a high voltage, low alternating current passes through the numerous windings of the primary coil. This induces a low voltage, high current in the workpiece acting as the secondary coil. This high current results in the heating up of the workpiece. Heat flows through the inner ring, causing a thermal expansion which allows a part to be fitted (or removed) without damage. When it cools down it shrinks onto the part.

Ja, u kunt huren. Informeer naar de mogelijkheden bij onze verkoopteam.>>

Yes, Induction heaters are used for assembly (Low Frequency) and/or disassembly (Mid Frequency) of bearings, gears, sprockets and other machine components. 

The BETEX MF Quick-Heater (Mid-Frequency) consists of a generator with a fixed or flexible inductor. The compact dimensions make it easy to move. MF Quick-Heaters save time because they can be used quickly (fewer actions) and heat faster than conventional methods. The energy consumption is much more efficient because less power is used. One of the major advantages of this type of induction heater is that they are not limited to cylindrical shaped components: flexible inductors can be wrapped around large or odd sized components.

Bearing manufacturers advise: 

Bearings generally should only be heated up to a maximum temperature of 120ºC (248ºF).  

If in doubt, contact the bearing manufacturer.

Induction heating is a superior, fast and controlled heating method. It is a safe and environmentally-friendly alternative to traditional heating methods such as ovens,

oil baths or blow torches. These methods generate smoke, fumes or oil waste and are hazardous for your personal safety and a healthy working environment.

It is common knowledge that a correct mounting method extends the bearing life. Controlled stress-free heating prevents unnecessary damage, while retaining the

original bearing lubrication. Ideal for sealed bearings (2RS-ZZ). Bearing manufacturers recommend controlled induction heating as the best practice for bearing mounting.

Accept No, rather not